Design Concept

I made a very basic turntable to assist me with the photos I take for my 3d modeling images. The platform is 200mm in diameter - perfect fit for your K1C, Hi ect. build plates.

You will need a standard 608 bearing. They are very common and not expensive at all. You should find one in most hardware stores and even sports outlets that sells skateboard wheel bearings.

If you cannot find one - Print one!

Just search this platform for '608 Bearing' or try this link

https://www.crealitycloud.com/model-detail/68a863206019a6ddc7e0c92e

Application

Ideal for use in product photography, this turntable helps showcase items like small craftworks, collectibles, or miniature models from every angle, enabling high-quality, consistent image capture.

Printing Recommendations

Print with PLA, 2 Walls, 10%-15% Rectilinear Infill

The sample above was printed on a textured build plate which makes the platform look very professional.

Assembly Instructions

Print the Platform and insert the 608 Bearing, then simply pop in the printed base and you're done.

If you find this model useful in anyway - please leave a LIKE and share your makes.

Basic Photo Turntable

0.2mm layer, 2 walls, 10% infill

TurnTable, 0.2mm layer, 3 walls, 10% infill

0.16mm layer, 2 walls, 15% infill