Design Concept

This is my exclusive model for the Creality Cloud Annual Designers Awards. The theme was not specified so I was a bit lost. I browsed through some older work looking for a "Thank You" idea and then remade an old favourite and ended up with this model.

Purpose

This desktop organizer is dedicated to the Legends who have supported me during the past year on the platform. I hope this finds its way to your desk.

Printing Recommendations

For single colour users - There are two plates. I suggest you print the pen holder with matte filament (I just love the matte finish). Then print the logo and letters in a contrasting colour to make it pop.

I have also included a CFS coloured print setting but it's a 15 hour print as opposed to the two separate plates which will take around 4-5 hours.

0.20mm layer height, 2 walls, 10%-15% infill will do the trick.

No supports please - You need the cavities open for the letters.

Assembly Instructions

Simply pop the letters into their respective slots - It's tight yes but I wanted to avoid using glue. I printed my samples with the Creality K1C as well as the Creality Hi and they fit.

Black Sample - I used Creality Matte Black PLA and Creality Green PLA Fluo

Green Sample - I used Panchroma Forrest Green Matte PLA and Eryone Copper Silk PLA

Note - There is a small thank you note at the bottom of the holder.

Thank you for your support - Please leave a LIKE and post your makes!

Designer Awards - Maker's Desktop Organizer

Two Plates, 0.2mm layer, 2 walls, 15% infill, K1C

MakersDO, 0.2mm layer, 3 walls, 15% infill