Starting your 3D printing journey is exciting, but once you've dialed in your first few prints, you might wonder how to improve performance, print quality, and ease of use. Good news: you don't need to invest in a whole new machine. A few simple upgrades can make a big difference - especially if you're using a popular FDM printer like the Creality Ender series or similar.

Here are the top 3 upgrades every beginner should consider:

1. Upgraded Bed Springs or Silicone Spacers

Why It Matters:

Stock bed springs on many entry-level 3D printers are often soft or inconsistent, causing the bed to shift out of level more frequently.

The Upgrade:

Replace the stock springs with stiffer yellow compression springs or silicone spacers. These maintain bed level much better and reduce how often you need to re-level.

The Benefit:

Less frustration. More consistency. Your bed stays level longer, which leads to better first layers and fewer failed prints.

2. Glass or PEI Build Plate

Why It Matters:

A smooth, clean print surface is key to first-layer success. Some stock beds warp or wear down quickly, leading to adhesion problems.

The Upgrade:

Swap your magnetic sheet or original surface for a glass bed (like Creality glass) or a PEI-coated sheet. These provide better adhesion for PLA and easy part removal once the bed cools.

The Benefit:

Stronger bed adhesion, cleaner first layers, and easier part removal - without damaging your print surface.

3. Dual Gear Extruder (Metal Upgrade)

Why It Matters:

The stock plastic extruder on many printers can wear out quickly, especially with stiff filaments or high-volume printing.

The Upgrade:

Install an all-metal dual-gear extruder. It grips the filament better, reduces slipping, and delivers more consistent extrusion.

The Benefit:

Better flow control, fewer under-extrusion issues, and longer-lasting hardware. It also prepares your printer for tougher filaments like TPU or PETG.

Bonus Tip: Firmware & Auto Bed Leveling

If you're ready for something a bit more advanced, flashing custom firmware (like Jyers or Marlin) and adding an auto bed leveling sensor (e.g. CR Touch or BLTouch) can drastically improve your experience. This helps compensate for slight bed unevenness and saves time on manual leveling.

Final Thoughts

You don't need to modify everything at once. Start with these beginner-friendly upgrades, and you'll notice smoother, more reliable prints. Plus, they're affordable and widely compatible with many Creality-style printers. Think of them as quality-of-life improvements - making your machine easier to use, and your results more consistent.

Happy printing!

Understanding print orientation: How it affects strength and quality