🖨️ PRINT SETTINGS – Single Colour (PLA+ recommended)

Printer: Creality K2 Pro / Bambu / Neptune

Material: PLA+ (best for detail + strength)

Layer Height:

0.12 mm for highest detail

0.16 mm for normal quality

(The scales benefit massively from 0.12 mm)

Perimeters / Walls:

3 walls

0.4 mm nozzle (default)

Optional: 0.2 or 0.25 mm nozzle for ultra-detail.

Infill:

12–18% Gyroid

20–25% if making a heavy/sturdy base

Top/Bottom Layers:

Top: 5–6

Bottom: 4–5

🔩 Supports:

If printed upright (recommended):

Supports: Only under chin, tail tip, and inside armpits

Support Type: Tree supports (best for organic shapes)

Support Density: 12%

Support Interface: Yes, 0.2 mm

Support Z Distance: 0.20 mm

Support-Free Version:

Print tail and head slightly tilted back 10° to avoid underchins.

🌡️ Temperatures:

Nozzle: 205–210°C (PLA+)

Bed: 55–60°C

Cooling: 100% after layer 3

🏗️ Orientation:

Best orientation:

Body upright

Tail naturally wrapping downward

Head angled up as in the picture

This positioning preserves scale detail and minimises seam lines.

🎨 Multicolour or Painted Version

If using AMS / MMU:

Assign colours:

Region 1 (head, dewlap): Red/Crimson

Region 2 (spines): Yellow / Green / Purple gradient

Region 3 (belly scales): Neutral beige or yellow

Region 4 (limbs): Alternating colour bands

Region 5 (tail): Gradient from yellow → purple → blue

Painting workflow:

Basecoat with neutral white primer.

Airbrush neon gradients (red → yellow → green → blue → purple).

Hand-paint eyes with gloss varnish for shine.

Colourful Lizard Articulated Look

Brett Douglass

Nyomtatási beállítások(1)

0.2mm layer, 2 walls, 15% infill

Leírás

Licenc

Kapcsolódó modellek