Isis is an ancient Egyptian goddess who became the most popular and enduring of all the Egyptian deities. Her name comes from the Egyptian Eset, ("the seat") which referred to her stability and also the throne of Egypt as she was considered the mother of every pharaoh through the king's association with Horus, Isis' son.

Project: isis 4.hfp

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x111.11mm in size

You may print at higher layer heights below the Min Depth of 0.48mm

The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used:

PLA PolyLite Black Transmission Distance: 0.3

PLA BambuLab Basic Black Transmission Distance: 0.6

PLA BambuLab Basic Yellow Transmission Distance: 6

PLA Hatchbox White Transmission Distance: 10

This print uses 4 unique filaments

Swap Instructions:

Start with Black

At layer #12 (1.04mm) swap to Black

At layer #13 (1.12mm) swap to Black

At layer #20 (1.68mm) swap to Yellow

At layer #23 (1.92mm) swap to White for the rest.

ISIS ancient Egyptian goddess

Brunomtc

Pengaturan Cetak(0)

Deskripsi

Lisensi

Tag

Model Terkait