Biomorphic Panther

1. Artistic Description**

This piece represents a **slender panther** through a **biomorphic** visual language. The anatomy breaks down into a network of intertwined tendrils and negative spaces that suggest movement. The design flows into an integrated organic base, eliminating external pedestals and ensuring structural stability.

Main Features

* **Organic Geometry:** Muscular "cage" structure with internal cavities.

* **Self-Supporting Base:** Optimized center of gravity so that the legs and integrated base support the torso without wobbling.

* **Surface Detail:** Intricate patterns designed to capture shadows (ambient occlusion) and reflections.

* **Material Optimization:** The hollow design reduces weight and material consumption without compromising rigidity.

Printing Guide (Resin vs. PLA)

A. SLA/MSLA Technology (Resin)

*Ideal for: Displays, jewelry, miniatures, and maximum transparency.*

* **Recommended Material:** Translucent or "Tough" resin.

* **Layer Height:** 0.025 mm - 0.05 mm.

* **Supports:** Requires needle-point supports on the inner tendril overhangs.

* **Orientation:** It is recommended to tilt the part back between 30° and 45° to minimize suction forces on the FEP.

* **Critical Settings:** Ensure precise layer exposure times to prevent thin tendrils from becoming "thickened" due to overexposure.

* **Post-processing:** Wash with isopropyl alcohol and UV cure for 2-5 minutes. A glossy varnish will enhance the pearlescent effect.

B. FDM Technology (PLA Filament)

Ideal for: Large-scale decoration requiring high mechanical strength.

* **Recommended Material:** PLA Silk or PLA Pearlescent.

* **Layer Height:** 0.12 mm - 0.16 mm (to conceal seam lines).

* **Nozzle:** 0.4 mm (standard) or 0.2 mm (for greater detail).

* **Supports:** * **Type:** Tree supports are essential due to the gaps.

* **Overhang Angle:** 50° to 60°.

Retraction Settings:** It is very important to keep this optimized (distance and high speed) to avoid stringing between the tendrils of the sculpture. * **Infill:** 10-15% (Gyroid for greater structural stability).

* **Speed:** Reduce to 40-50 mm/s to ensure that the fine details of the head and tail do not vibrate during printing.

Configuration Comparison Chart**

| Parameter | Resin (SLA) | PLA (FDM) |

**Resolution** | Ultra High (Almost invisible) | Medium/High (Visible to the touch) |

**Support Complexity** | Medium (Easy to remove) | High (Requires care when removing) |

**Material Finish** | Smooth, glassy, translucent | Satin, metallic, or matte |

**Print Time** | Fast (Independent of volume) | Slow (Depends on size) |

Biomorphic Panther

ADA TECH

Pengaturan Cetak(1)

0.2mm layer, 2 walls, 15% infill

Deskripsi

Lisensi

Tag

Model Terkait