PETG since going outside, I used a 0.6mm nozzle at 0.3/0.6mm (which you can achieve just by changing your setting even with a 0.4mm nozzle!)

- There are holes in 4 corners to help mount it (5.2mm diameter - I used M4 socket screws to mount mine and place a washer just for the nut in the back since my hole was bigger in my box).

- Before I had this sign printed, I still had packages left on the stoop itself and sometimes "on the box" not in... since then... all of them have been placed inside of it!!

- I bought my container on Temu for around $35-40 if I recall... they are not heavy duty (like to sit on it... or at least I would not try) but for a porch one, no water infiltration, good looking and affordable price to secure my packages, ANY DAY worth the money!! : )

I hope it will work for you as well!

I printed with Sunlu black and added a pause on the first layer of the letter to change my filament to CR-PETG white rom Creality.

did a 2 walls (0.6mm wide so 1.2mm) and 3 top/bottom (so 0.9mm).

Infill at 15% cubic.

Drop Off Package Porch Sign

AliSev

Pengaturan Cetak(1)

0.3mm layer, 3 walls, 10% infill

Deskripsi

Lisensi

Tag

Model Terkait