🔥 Best General Settings (PLA – Creality Hi Combo)

🧱 Layer Settings

Layer Height:

0.2mm (balanced quality/speed)

0.16mm if you want cleaner detail

Initial Layer Height: 0.24mm

Line Width: 0.42–0.44mm (for a 0.4 nozzle)

🌡 Temperature (PLA)

Nozzle: 205–215°C

Bed: 55–60°C

Fan: 100% after layer 3

If you're using PLA+ → bump nozzle to 215–220°C.

🏗 Strength / Walls

For props or functional parts:

Walls: 3–4 perimeters

Top Layers: 5–6

Bottom Layers: 5

Infill:

10–15% (display only)

20–25% (functional)

Infill Pattern: Gyroid (best all-around)

⚡ Speed (Creality Hi Combo Sweet Spot)

Print Speed: 50–60 mm/s

Outer Wall Speed: 30–40 mm/s (improves surface quality)

Initial Layer Speed: 20 mm/s

If it's a tall or thin model → slow to 45 mm/s.

🧲 Adhesion

Use brim (5–8 lines) if:

Tall print

Small contact area

Warping risk

Otherwise skirt is fine.

🪚 Supports (If Needed)

Support Type: Tree (for detailed props)

Density: 10–12%

Support Interface: ON

Z Distance: 0.2mm

🎯 If This Is a Detailed Mask / Skull / Cosplay Part

(You’ve been working on a few of those)

Use 0.16 layer height

Enable ironing for top surfaces

Slow outer walls to 30 mm/s

Increase wall count to 4

🛠 If This Is a Mechanical / Connector Model

4 walls

30% infill

0.2 layer height

Print at 55 mm/s

Calibrate e-steps if tolerances matter

Gengar oni mask creation

Hashcach

Pengaturan Cetak(1)

0.2mm layer, 2 walls, 15% infill

Deskripsi

Lisensi

Tag

Model Terkait