This is a remix of a Hot Wheels keychain adapter. I removed the key chain tab and made the base longer and wider to fit a command strip. The mount clips onto the wheel axle, though the tolerances might be tight. If a new size is needed, you can provide measurements or the Hot Wheel you have, and I will upload additional models. Remember to check out the original model, as this would not have been possible without it.

I printed mine with the Creality K1C with Creality Hyper PLA-CF

Original Model: https://www.**********.com/model/1372171-hot-wheels-keychain-adapter-no-drilling-needed

Link to the command strips I used:

https://www.amazon.com/Command-Poster-Hanging-Hangers-Adhesive/dp/B0751VFF2X/ref=sxin_17_pa_sp_search_thematic-asin_sspa?content-id=amzn1.sym.89c28aba-3815-44bf-8339-28a230fead99%3Aamzn1.sym.89c28aba-3815-44bf-8339-28a230fead99&crid=GIV8RRGOS0DN&cv_ct_cx=command%2Bstrips&keywords=command%2Bstrips&pd_rd_i=B0751VFF2X&pd_rd_r=d0821085-428d-492e-8107-50e1dcd72c8b&pd_rd_w=Jmxyg&pd_rd_wg=REbo5&pf_rd_p=89c28aba-3815-44bf-8339-28a230fead99&pf_rd_r=YD5SEWX1GC6PRNK02F2R&qid=1771803757&sbo=RZvfv%2F%2FHxDF%2BO5021pAnSA%3D%3D&sprefix=command%2B%2Caps%2C212&sr=1-2-9fb047b7-8fa5-469b-b7a3-6067b9412ad2-spons&aref=l85HqRFQlX&sp_csd=d2lkZ2V0TmFtZT1zcF9zZWFyY2hfdGhlbWF0aWM&th=1

Hot Wheel Compact Wall Mount

Qbow14

Pengaturan Cetak(2)

PLA-CF, 0.2mm layer, 2 walls, 15% infill

0.20mm layer, 2 walls, 15% infill

Deskripsi

Asli

Lisensi

Model Terkait