Hi, my print of "BENDER 13.7 INCH FIGURE FANART" by [%5567514624] Printed at 100% scale. (That takes some time) As I have finicky printers (from time to time), the 16 files/parts are printed one by one to limit losses in the event of a printing failure. printer nozzle size: 0.4mm filament used: PLA in different colors (two different metallic blue, silk blue, white, pine green) slicer uses: Ultimaker Cura printing temperature: 190°C print bed temperature: 60°C print speed 80 mm/s layer height: 0.2mm shell thickness: 0.8 mm ( I should have used 1.2 mm to make 3 perimeters with my nozzle of 0.4 mm in diameter, because with 0.8 mm the filling impacted the surface of the shell. ) infill percentage: 20% type of bed adhesion: "skirt", except for parts requiring supports, here I used a "border" (to anchor the supports well on the printing bed.) printing supports: only for 'BRAZO DER.stl', CADERA.stl, 'MANO DER.stl', 'BRAZO IZQ.stl', C_CABEZA.stl, 'MANO IZQ.stl' types of supports: "arborescent" overhang angle: 40° Posted as an entry for the "Creality Cloud Summer Print & Paint Contest" https://www.crealitycloud.com/post-detail/64c093bbb1d373b83c86c1ed Good continuation to all.