The model can be used as Plant pot/ vase/ container/ bowl.

Wall Plant Pots Collection Commercial License: You can print and sell these models. Concept: A plant pot which can be placed on floor against wall and can also be hanged on wall to save space. As the pot is only 180 degrees unlike regular pots it saves spaces over places like stairs, indoor, E.T.C . Total available 9 models. The models are available with and without drain hole. Video link: https://www.youtube.com/channel/UCl81Wd0-LmacT_TfOnIf2PQ 3D printing settings: Slicer software: Creality slicer, Printer: FDM / RESIN, Filaments: PLA, PETG, ABS, E.T.C, Retraction: 4mm speed 40, Nozzle Temp: minimum 190 to 210 C bed 90 C for PLA (no glue stick/adhesive needed) Infill: Minimum 8%, Print in place, Support: No supports needed, if necessary, turn on make overhang printable. Ignore watertight error, Layer height: 0.24, (use high diameter nozzle for fast printing) Build plate adhesion: brim at least 10mm, Thank you, Have a cute day. Regards, Sigma Designers.