Hi ! My print of "Jackal" by "FreeMan886" Printer: "Halot-Mage Pro" File "Jackal2.stl" Scale: 150% Prepared and sliced under Chitubox Pro v1.4.1 win ( Scaling, Orientation, placement (after rotation I made a move Z=-0.5mm to have good contact with the plate and I took care to put the lifting of the object at 0.00 mm when installing the print supports), automatic supports completed manually ) Layer height: 0.05 mm without anti aliasing Resin used: Creality Water Washable Resin Plus White Exposure time of normal layers: 2.2s ( printing environment temperature: ~14°C ) After a quick soak in a "dirty" 99.9% isopropyl alcohol tank, removal of most of the printing supports, cleaning again but this time in a "clean" 99.9% isopropyl alcohol tank, a drying time, a sanding step to remove elephant feet due to over-exposed layers in contact with the plate followed by further cleaning and drying to remove sanding particles, a UV treatment (~2 minutes) and removal of last pieces of printing supports. Posted as an entry for "Introducing the Exciting November 3D Printing Event!" https://www.crealitycloud.com/post-detail/6540a6fc42c4bce0a33bd62c "November 3D Printing Event" https://www.crealitycloud.com/contest/november-3d-printing-event Good continuation to all !