Hi ! My print of "Vus - Spear Maiden to Morrigan - PRESUPPORTED - 32mm Scale" by "Printed Obsession" Printer: "Halot-Mage Pro" Files: "STL_Vus - Full_Supported.stl", "STL_Vus - L Wing_supported.stl", "STL_Vus - R Wing_supported.stl", "Vus - Raven 2_supported.stl", "Vus - Scarf Raven_supported.stl" ( Presupported version ) Scale: 100% Sliced with: Halot Box (v4.5.0.3692-win64) Layer height: 0.05 mm, without anti aliasing Resin used: Creality Water Washable Resin Plus White Exposure time of normal layers: 2.3s ( printing environment temperature: ~12°C ) After a quick soak in a "dirty" 99.9% isopropyl alcohol bath, removal of most of the printing supports, cleaning again but this time in a "clean" 99.9% isopropyl alcohol bath, a drying time, a UV treatment (~2 minutes) and removal of last pieces of printing supports. Approximately assembly and gluing... Posted as an entry for "Introducing the Exciting November 3D Printing Event!" https://www.crealitycloud.com/post-detail/6540a6fc42c4bce0a33bd62c "November 3D Printing Event" https://www.crealitycloud.com/contest/november-3d-printing-event Good continuation to all !