Hi ! My print, of "MECHANICAL FLOWER" by "MECH3D PRINTING". Slicer: Creality Print v4.3.8.6678 (Win). Printer profile "Ender-3 V3 KE_0.4 nozzel". Material profile "CR-PLA_1.75" modified (Temperature, Printing Temperature: 215.00 °C, Initial Printing Temperature: 215.00 °C, Final Printing Temperature: 215.00 °C, Auto Temperature: No.). Parameter config "Normal" (0.20mm). Scale: 100% File(s): GEA-023.stl .gcode file: mf-blanc_GEA-023-Ender-3 V3 KE_0.4_CR-PLA 215_46m.gcode Filament: PLA Silk Blanc ArianePlast (~ 4,142m) ~ 00 h 47 m 54 s File(s): GEA-026.stl (x7) .gcode file: mf-blanc_GEA-026-GEA-026-0-GEA-026-1-GEA-026-2-GEA-026-3-GEA-026-4-GEA-026-5-Ender-3 V3 KE_0.4_CR-PLA 215_2m.gcode Filament: PLA Silk Blanc ArianePlast (~ 0,256m) ~ 00 h 02 m 45 s File(s): GEA-025.stl .gcode file: _brim_mf-green_GEA-025-Ender-3 V3 KE_0.4_CR-PLA 215_51m.gcode Filament: PLA Silk Vert ArianePlast (~ 7,022m) ~ 00 h 54 m 55 s File(s): GEA-018.stl .gcode file: mf-blanc_GEA-018-Ender-3 V3 KE_0.4_CR-PLA 215_24m.gcode Filament: PLA Silk Vert ArianePlast (~ 3,515m) ~ 00 h 25 m 45 s File(s): GEA-020.stl .gcode file: mf-bleu_GEA-020-Ender-3 V3 KE_0.4_CR-PLA 215_1h27m.gcode Filament: PLA Silk Vert ArianePlast (~ 11,626m) ~ 01 h 28 m 55 s File(s): GEA-021.stl (x3) .gcode file: mf-jaune_GEA-021-GEA-021-0-GEA-021-1-Ender-3 V3 KE_0.4_CR-PLA 215_1h5m.gcode // Printed twice Filament: PLA Silk rose ArianePlast (~ 6,581m) ~ 01 h 08 m 14 s After removing the printing supports, deburring and assembling. Posted as an entry to the "Christmas 3D Printing Event!" https://www.crealitycloud.com/post-detail/65839ead3e2577f851884efd https://www.crealitycloud.com/contest/christmas-3d-printing-event Good continuation to all.