This is "Happy Mother's Day House Miniature" model.Designed on the occasion of Happy mothers day event.
Description :
This image captures a vibrant and detailed 3D-printed diorama set outdoors on a textured, concrete surface. The model depicts a serene domestic scene, blending geometric architectural lines with organic natural forms.

Key Elements of the Diorama
The Residential Structure: A two-story house sits on the left side of the base. It features a striking red roof with a tiered design, contrasted against black walls. Small green-tinted windows are visible on both levels, providing a pop of color against the darker frame.

The Family Figures: Positioned on the walkway in front of the house is a small group of all-white figures, representing a family. Their minimalist, monochromatic finish makes them stand out against the more colorful background of the house and tree.

The Tree & Signage: To the right, a large stylized tree dominates the composition. It has a textured, brown-and-yellow trunk supporting a lush, bright green canopy with a rounded, bulbous texture. Wrapped around the trunk is a black banner with white lettering that reads "Welcome to MY FAMILY," flanked by two small red hearts.

Landscaping & Base: The entire scene is mounted on a gray, textured base designed to look like a stone or gravel path. A tiny black picket fence follows the curve of the walkway, separating the house and tree from the edge of the model.

Composition and Environment
The photo is taken from a slightly elevated, three-quarter angle under bright, natural sunlight, which casts distinct shadows to the left. The rough, neutral-toned concrete ground serves as a stark background, emphasizing the saturated colors and the 3D-printed texture (visible layering) of the model.

3D printing settings

Slicer Software: Creality Print 7.1
Printer: Ender 3 KE
Profile Mode: Normal Quality
Layer Height: 0.1 -0.2
Infill: 7-15% (Gyroid).
Retraction: 2mm minimum
Print Speed: 300mm/sec.
Printing Temp: 220°C.
Support: Yes (Tree-Organic) for Respective parts.

NOTE:- 1) Enable the "Overhang Printable Option" for Base with tree model.

2) Use super glue to fix all parts permanently.

Hope you like my work..!! Please support me & Follow, like for more interesting designs..!!
Happy Printing

mothersday