*All magnets use 10mm x 2.3mm (or 2.6mm) magnets . Suggested magnet:

https://www.amazon.com/SMARTAKE-Refrigerator-Magnets-Multi-Use-Whiteboard/dp/B081GDWRZT?th=1&psc=1&linkCode=ll1&tag=matmiremakes-20&linkId=b5fee1a0a109cdf3a8a2a5ef2e53c23d&language=en_US&ref_=as_li_ss_tl

*While it may be possible to safely drop the magnets in without pausing the print, if you are using a faster printer or printing many magnets at once... it would be best to add a pause to your print. I suggest pausing close to the layer where the magnet slot is nearly done, but not covered (see slice image above). This is fairly easy to do in most cases, but be aware that some printers do not support this option via gcode, and must be paused manually. Please research your printer and slicer if you are unsure how to do this.

- 0.16mm layer height

- 3 walls with a 0.4mm nozzle (could do 2 walls with a larger nozzle.)

- 10% Lightning infill (lightning infill is great for these because it keeps the weight down and only creates infill where needed. Keeping the weight down helps the magnets be more effective.)

- 5-6 bottom layers (gives a little extra strength to the magnet attachment area.) - If your printer struggles with bridging, you may need to add support inside the magnet slot. Give it a try without and see how it goes.

Capybara Fridge Magnets!

Tropxz

인쇄 설정(0)

설명

라이선스

태그

관련 모델