The vortex fidget toy is a sleek, spinning design inspired by the shape of a vortex. It is designed to be held in one hand and spun for a calming, tactile experience. The toy features smooth, curved edges and a symmetrical layout for efficient spinning and comfort.

Key Features:

Vortex Shape: A spiraling design with smooth, flowing curves, giving the illusion of a vortex in motion. The toy is balanced for optimal spinning.

Outer Grip Rings: Circular or spiral outer extensions for grip and improved rotational inertia.

Support-Free Design: The toy is modeled so that no overhangs exceed 45°, ensuring it can be printed without supports.

Ergonomic Grip: Designed with smooth edges for comfortable handling during prolonged use.

Printing Instructions:

Layer Height: 0.2 mm for a smooth surface finish.

Infill: 20–40% for balanced weight and durability.

Material: PLA or PETG for a solid and smooth print. Use flexible filament like TPU if a softer feel is desired.

Build Plate Adhesion: No brim or raft is needed; a skirt is sufficient for adhesion.

Orientation: Print flat on the build plate with the bearing pocket facing upward to ensure dimensional accuracy.

Additional Notes:

After printing, insert the bearing into the center pocket. If it feels tight, use light sanding or gentle heat to adjust the fit.

For better spin times, use a high-quality, lubricated bearing.

The vortex design can be scaled up or down to fit different hand sizes or preferences.

Optionally, add embossed or engraved patterns for aesthetic customization.

Vortex Fidget Toy

STL_WALA

인쇄 설정(0)

설명

라이선스

태그

관련 모델