Dear community, Happy Christmas to you and your family. Here is our Christmas gift ''CiCi Christmas tree ornament and keychain''. The plane model can also be used as a keychain later. My first interaction in this site was with CiCi. At first, I thought it's a person, later thought it's an AI, the eyes are very cute & attractive and after a while I came to know it's our amazing support [%2443000667].Printing type I: Parts : a) eyes b) plane model a) The eyes alone can be printed and glued to the place where ever you want, the eyes are so expressive and cute. You can also print and glue these to the plane model. b) You can print and paint the top eyes or can print the top extruded eyes with different colour by using the post processing code ‘filament Change’. Printing type II (multi colour): Step1: open cici eyes and then click on file and then add the plane model make sure the eyes overlap with slot of the plane model.Settings: layer height 0.2 Bed adhesion none. Delete the top plane model and slice the file and save it to your drive. Step 2: Press Ctrl+z this will bring back the top plane model Now delete the bottom eyes. Settings: bed adhesion brim 5mm, Ironing: on, 5% Inset: 0.1mm If monotonic ironing available turn it on. Turn on: Z hop when retracted- 0.4mm Step3: on top left go to extensions - post processing and select filament change, choose the height/ layer where the top extruded eyes start, start code m300 (this will give a beep sound when to change filament). Slice it and save it to your drive Now print the eyes with black/ your choice of interest and then print the plane model on top of it by white colour / different colour. Again filament change with different colour.Model 2: Place a support at the bottom and scale it to 3 mm and then pull it downwards, this will push the model upwards and will give a round surface while printing. You can print and then paint the eyes / if you have a multi colour printer use the obj file .Model link: https://www.crealitycloud.com/model-detail/658560c53528de8d4cc1831f Thank you,Have a beautiful day, Take care,Regards,Sigma Designers.