Description
The PelletMag .22 Pellet Carrier System Airgun Magazine
Fed up with carrying noisy tins of airgun pellets around? You need The PelletMag!
I have been shooting for years and designed the PelletMag to carry my pellets instead of noisy tins.
Each magazine easily carries 50+ (5x10+) Pellets depending on the size of the pellets.
This system allows you to carry different makes of pellet in one magazine and they are easily dispensed when needed.
I have designed The PelletMag so you can eject or dispense one pellet at a time or a few depending on how hard you move the thumb switch.
I have used copper, alloys and normal pellets of most makes and sizes without a problem. I have included 2 different sized ejector caps. I use the one marked L as it fits most pellet sizes. The other cap if for smaller sized .22 pellets.
Also available in .177, see my other designs or look up .177 PelletMag
You will need
PETG or Similar
TPU or Flex
Tiny amount of superglue
1 Once printed please check you are happy that pellets eject through the pellet ejector cap.
2 Carefully apply a small amount of superglue to the inside edge of the ejector cap and insert the magazine body.
3 Allow to the superglue to dry, a clamp or weight will aid the drying process.
4 Go shooting, enjoy and shoot safe!
This is for personal use only and not to be sold. You can find me at Cults 3D - 3DPFactory
Contact me if interested in licencing for commercial purposes.
Print settings
Magazine PETG 30% infill
Thumb Switch 100% infill
Load Cap TPU (or flex) 100% infill print slow
Pellet Ejector Cap TPU (or flex) 100% infill print slow
No supports needed
This is the perfect companion for BSA R10 SE Black Edition PCP, CLX, Ultra, 160, BSA R12, Daystate Red Wolf Safari Hi-Lite PCP, Huntsman, HW95K, Weihrauch HW 100T PCP HW100, FX Crown, FX Wildcat, Maverick, EDGUN LEISHIY, Matador, R5, Dreamline, Gamo Magnum, Phox, Hatsan AirTact PD, Umarex Ruger, Sig Sauer MCX, Daisy Pump, Crosman, Air Arms S400, S510 Ultimate,
