Desktop Foosball Table - Print-In-Place

Description

Designed specifically for the 'Sports Design Contest' 11/11/2022 --------------------------------------------- AN ORIGINAL DESIGN BY ZURLINGO-3D --------------------------------------------- Desktop Foosball Table - This is a fun little novelty piece, perfect for a man cave or desk. It is actually playable like real Foosball and is printed in one go. ------------------------------------ Print Settings - Printed with a 0.6mm nozzle at 0.32 layer height and 120mm/s - Takes roughly 3.5hours. Use a brim. Support everywhere at 50 degrees and around 20% density. The trickiest bits to print are the handles. This is mainly due to the support moving slightly during the print, so keep an eye on it. ---------------------------------------- The Ball is too big at 10mm - Use your slicer to scale to 60-80% and lift it 1mm off the printer bed. Add support touching build plate and use a brim. ---------------------------------------- If you like this model, please click the 'Like' button to help me place higher in the competition. Thank you :) ---------------------------------------- *FREE FOR THE DURATION OF THE COMPETITION*