Description
I have updated this file, as the teeth used to be a bit too delicate. The model prints much smoother now, and so because of that, I am excited to release it here on Cults! I adore this model, and so far, when I have taken it to shows it has sold out. That is a pretty fun feeling for a designer. :)
You can absolutely scale this model down if you wish. The rainbow dog shown in the photos was scaled down to about 65% of the original size. I don't know that I suggest going smaller than 39%, but feel free to play with it and let me know in the comments if you do! (I have successfully printed down to 39% and that is the tiny dog seen in the photo attached)
The model does require supports, as there was no way around it. One of my Patrons has tested this model on a resin printer, and I LOVE how it came out. He printed it with the teeth pointing up to avoid additional supports there.
On the Bambu, this model was printed at 65% size in about 3 hours flat using settings similar to those listed below.
PLEASE READ:
This upload (like all Pretzel Prints uploads and designs) is under copyright, and upon purchase, you do not have the right to sell prints commercially. The digital files are NEVER to be re-sold, shared, or given away!
If you are interested in selling this model commercially check out my Patreon! https://www.patreon.com/user?u=25054604
Recommended Settings:
Layer Height: .15mm
Infill: 8%-10%
Walls: 3
Supports: Yes
