Fuel Gauge Wall Key Holder Hanger

Description

Have a special place for your car, truck, or motorcycle keys. When placing a key, the gauge shows a full tank. The design keeps keys away from the wall to protect the wall and the keys. The model can be fixed to the wall with double-sided adhesive tape, or with a small screw. With the exception of the "glass" (optional), this model does not need any additional non-3dprinted parts, no gluing required either. Print it with any color combination you prefer, use your car color, the possibilities are endless. If you prefer, you can print the background on a regular 2D printer, or even create your own. All files in STL extensions to print without support. Some parts have an optional "-Brim" extension for better bed adhesion. You can use rafts if you prefer too. Use your standard 0.2mm configuration For the PointerBase and Weigth use 80% infill to make a heavy part. Print BackgroundForPaper only if you intend to use a paper background, otherwise follow the instructions to print the Background part Background Very similar to the Bush Homer sponge holder. Use 0.1mm layer height and 10 top and bottom layers to make a solid piece. The print must be paused at specific heights to change the filament color Start with Black or the base color 1.1mm - White (or the letters and symbol color) 1.5mm - Red (or the "empty"color) Building tips: Although its assembly is intuitive I have included a video of the build. https://youtu.be/hqSG6hkbXUw For the "glass" you can use a transparency sheet or cut it from a package, I cutted mine from an disposable cake container. It's a 63mm disc, use the background as a reference. For the paper background, use the 3d printed BackgroundForPaper to guide you through the cuts. PDFs of background designs here too: https://drive.google.com/file/d/1-SHotHk0a8ojoRnm3Vh5KL7M5KA3ywZy/view?usp=share_link