This All-in-One Tool Caddy is custom-designed for the Creality 3V3 Plus printer. It solves the common issue of tool and accessory clutter by utilizing the left-hand side of the printer, which is typically open since the spool and camera often mount on the right if you have default set up. The design is engineered for maximum storage efficiency, securely holding the original printer tools (snips, scraper, nozzle kit, etc.) plus additional essential accessories, all while maintaining a neat, low-profile appearance.

Compatibility Note: This model is also highly compatible with the Creality K1 and K1 Max due to shared frame dimensions*.

Print Settings

Printer: Creality 3V3 Plus

Material: PLA (PETG or ABS recommended for maximum durability/heat resistance)

Layer Height: 0.20mm (for a balance of speed and detail)

Infill: 20% Cubic or Gyroid

Supports: Minimal or None. The model is designed to be largely self-supporting. Minor support may only be required for the mounting tabs depending on your printer calibration (use Tree Supports if needed).

Brim/Skirt: A skirt is sufficient for initial adhesion.

Assembly

Preparation: Print the main body file (pakrat-c080-3v3plus-left.stl) and any optional accessory inserts.

Mounting: The caddy is designed to slide under and snap securely into the left front -side leg the printer body.

Final Installation: Gently slide the caddy under the leg until it locks into place near the base. No screws or modifications to the printer are required.

*Please check specific frame dimensions if you own a non-standard K1 model.

这款多合一工具箱是为Creality 3V3 Plus打印机定制设计的。它通过利用打印机的左侧解决了工具和配件杂乱的常见问题，打印机的左侧通常是开放的，因为如果您有默认设置，线轴和相机通常安装在右侧。该设计旨在最大限度地提高存储效率，安全地固定原始打印机工具（剪子、刮刀、喷嘴套件等）以及其他基本配件，同时保持整洁、低调的外观。

兼容性说明：由于共享框架尺寸*，该模型也与Creality K1和K1 Max高度兼容

.這款多功能一體工具箱是為Creality 3V3 Plus印表機定製的。它透過利用印表機的左側解決了工具和配件雜亂的常見問題，印表機的左側通常是開啟的，因為如果您有預設設定，線軸和相機通常安裝在右側。該設計旨在實現最大的儲存效率，安全地容納原始印表機工具（剪子、刮刀、噴嘴套件等）以及其他基本配件，同時保持整潔、低調的外觀。

相容性說明：由於共享幀尺寸*，該模型也與Creality K1和K1 Max高度相容。

3V3 Plus Left-Side All-in-One Tool Caddy - THE ONLY LEFT ONE

Cobo Oviedo

Tetapan Cetak(1)

Default

Penerangan

Lesen

Tag

Model Berkaitan