Design Concept

The Crown: The top of the helmet is transformed into the dolphin's head, featuring a prominent, aerodynamic dorsal fin and spiked ridges along the rear to mimic a "mohawk" of dorsal spikes.

The Visor/Face: The helmet's "beak" acts as a sunshield, while the eye placement gives the piece an "angry mascot" expression.

The Base: The helmet sits on a sculpted "splash" pedestal, creating a sense of movement as if it’s emerging from the ocean.

Color Palette: It uses a high-gloss Teal/Aqua base with Orange accents and a high-contrast White graphic swoosh, typical of the NFL team’s branding.

Printing Settings: Creality Halot R6

Since this is a detailed decorative piece, you want to prioritize surface smoothness to minimize sanding. Use Halot Box or Chitubox for slicing.

Setting Recommended Value

Layer Height 0.05 mm (standard) or 0.03 mm (for ultra-detail)

Exposure Time 2.5 – 3.2 seconds (depends on resin brand)

Bottom Exposure 25 – 35 seconds (to ensure base adhesion)

Bottom Layers 5 – 6 layers

Lift Distance 6 – 8 mm

Lift Speed 60 mm/min (keep it slow for the heavy base)

Anti-aliasing Level

Pro Tip: Orient the helmet at a 30-45 degree angle tilted backward. This prevents suction "cupping" on the interior of the helmet and ensures the supports are mostly on the back and underside, keeping the face/front clean.

Would you like me to generate a similar concept for a different NFL team or provide a specific post-processing guide for painting this model?

Miami Dolphins Helmet

Keet 3D Print

Tetapan Cetak(0)

Penerangan

Lesen

Tag

Model Berkaitan