A large format, Hexagonal, moss pole for larger climbing plants. I designed them so you can endlessly stack them as your plant continues to climb. the moss pole can be planted directly into the pot or the ground, and stuffed with live (or dead) moss mixes to provide your climbing plants with a substrate to dig their roots into as they grow. One segment of the moss pole is 209.5mm tall X 115mm across.

{01/30/24}

I have added additional features, allowing for the creation of branches on your moss pole, giving it a more tree-like design, while maintaining the original hexagon theme. The moss_pole_small file may be used to extend the branch segments, or as a smaller version of the moss poles. I have also made funnels that can be placed on top of the pole for easy watering.

the small moss poles are the same height as the original, but scaled to 50% on the other vertices. All of the moss poles and funnels can be printed without supports, but the branch hanger will need supports. I recommend placing the side with the hooks down, and adding your supports only for the base of the branch.

I would also recommend using zip ties for additional strength when attaching the branches. In my testing, the 3d printed part, alone, was able to withstand the weight of the wet moss, but began to strain when I applied additional pressure. 2 zip ties added at the attachment point was able to fix this.

Stay tuned, as I have more plans for future updates.

Print Settings: Device: CR-10 Smart Pro Filament Type: PLA Adhesion: SimpleRaft, or brim (I've had more luck with simple raft) Layer Height: 0.30mm Infill Density: 15% Supports: No (yes for Branch_v1)

Hexagon Moss Pole with branches

Punk_platypus

Ustawienia druku(0)

Opis

Licencja

Tagi

Powiązane modele