NEBULA CAMERA HOLDER

‎

This camera support is an essential accessory for moving timelapses following the Z-axis, making it easy to capture high-quality videos.

‎

Valid for:

CREALITY ENDER-3 V3 KE

CREALITY ENDER-3 V3 SE

‎

✅ Easy printing. Does not require supports.

‎

Slicing and printing tips:

🏆 For optimal results, download .STL and laminate depending on the printer and filament used.

‎

Technical characteristics:

Measurements: 41.30 x 71.30 x 35.00 mm

Weight: ≃20g

‎

Assembly:

- Make sure you have a screw of the correct size to secure the camera to the support.

- To mount the camera upside down, move the base across the front of the camera so that the camera is in the correct orientation and the base is on top.

- Test the mount with the camera before mounting the mount to the printer.

- Check the tension of the X-axis belt. Remember the original tension.

- Remove the X-axis tensioner screw.

- Replace the plastic cover of the tensioner with the printed camera support.

- Check the support is properly seated to the X-axis of the printer.

- Replace the X-axis tensioner screw and tighten the screw until you have the correct belt tension.

- Move the X-axis to the highest printing position to accommodate the camera cable so that it is not strained. Roll or collect the excess cable with some fixation.

- Perform a leveling to check that everything works correctly.

- Adjust the vertical angle of the camera to your liking with the Creality Cloud app.

- Enjoy timelapses of the highest quality and from the best angle with height tracking as you print.

________________________________

‎

Is there an error or do you think it can be improved? Let me know, feedback appreciated.

Like and sharing is a boost for me to keep creating and improving.

If you print, share your creation with me, I love to know if you like it. ❤️

Thanks for watching.

NEBULA CAMERA HOLDER FOR ENDER 3 V3 (SE-KE)

ANVIL

Ustawienia druku(0)

Opis

Licencja

Powiązane modele