PiviotClip Pro V2:

This model is a print-in-place mechanical cable management solution designed to demonstrate functional motion and thoughtful mechanical design. The clamp features a dual-axis rotating system, where both the base and the top retention arm rotate independently to provide controlled cable positioning and retention.

Design features:

The design incorporates a print-in-place dual-rotation mechanism, separating alignment and retention into two independent motions. The rotating base allows post-installation directional adjustment, while the rotating top arm applies controlled downward force to secure cables without fully enclosing them. This mechanical separation improves usability, reduces cable strain, and showcases functional motion beyond static cable clips.

The clamp is designed to allow cables to be added, removed, or repositioned without tools, emphasizing practical mechanical interaction and user-centered design. Most moving parts are integrated directly into the print, requiring no additional hardware or assembly other than placing the arm on the top of the rotating base, and then placing the pin stopper onto the top of the arm axel system to make sure that the arm doesn't fall out. This was designed this was to ensure that each rotating part rotates smoothly and efficiently.

This model highlights mechanical intent, motion-based functionality, and print-in-place engineering.

Key Design Highlights:

Print-in-place dual-axis rotating mechanism

Independent rotation for alignment and cable retention

Functional motion with real-world usability

Compact and efficient mechanical layout

Printing Recommendations:

Orientation: Print the base part in this orientation to ensure that it can spin correctly:

No supports required for any of the parts!

PLA+, PETG, or ABS recommended

PiviotClip Pro V2

3DP_T

Ustawienia druku(1)

0.2mm layer, 2 walls, 15% infill

Opis

Licencja

Tagi

Powiązane modele