This unique 3D model blends modern design with a cosmic aesthetic. Featuring a realistic lunar surface, the moon appears to float effortlessly in the air, thanks to cleverly concealed magnets. A soft internal glow transforms it into more than just a decorative piece—it becomes a mesmerizing ambient light source. Perfect for minimalist or futuristic interiors, or as an eye-catching, one-of-a-kind gift. A project that brings together science, design, and a touch of magic.

What do you need?

-2x round neodymium magnet 10 x 4

-1x 3.3v LED

-1x 220Ω resistor

-1x Basket for 4 AA (R6) batteries with cover and switch (size approx.: 65, 70mm)

Instruction:

-Place the neodymium magnet in the designated spot and secure it with super glue or similar.

-Use a soldering iron to create a hole for the LED in the designated place on the other side of the moon

-place the battery compartment in the appropriate place on the base

-solder the entire circuit so that the diode lights up when the switch is turned on(the cables must pass through the hole in the housing)

-secure the diode with hot glue

-attach the arm

-Place a magnet in the arm so it attracts the one in the moon and stick it with super glue or similar

-Adjust the length of the cable coming out of the base so that the magnets attract each other and the moon does not fall down, the distance from the upper to the lower magnet is about 1 cm

-secure the cable outlet with hot glue

moon lamp