Hello, 3D printing hobbyists,

3D printing slicer software acts as the middleman between the model and the printer. Creality Cloud's built-in slicer is one of the most fantastic features to help you slice 3D models and generate G-codes on your phone. However, we noticed that some of the default print settings for slicing did not come out with a perfect print. To help you get the best results from your 3D printer with your phone, we have taken a long hard test for Creality FDM printers based on different print parameter settings and we’ve gone through our print profiles and carefully optimized them to make them print better than ever! Let’s look at the example we did for the FDM print test.

1. CR-6 SE print effect before and after print setting adjustment with cloud slicer.

Profile: Dynamic (0.10mm) print effect

Profile: Balanced （0.15mm）print effect

Profile: Speedy （0.20mm）Print effect

2. Ender-5 S1 print effect before and after print setting adjustment with cloud slicer.

Profile: Dynamic (0.10mm) print effect

Profile: Balanced （0.15mm）print effect

Profile: Speedy （0.20mm）Print effect

NB: PLA filament is used in the above print test produced by Creality. The printing effect may be different based on the different filaments.

If you have any problem when using the slicer, please reach out to our customer service and give us feedback. Thank you for your support.

Optimized Print Settings to Improve Your Print Quality