Commercial license: You can print and sell this model.

Ho Ho Ho Happy Christmas dear friends here is our favourite Santa Claus mask, now we can become Santa whenever we want. Holes are provided on the ear where an elastic/ velcro can be placed, you can also use a rubber band / old face mask's elastic for it, anything works. For convenience use two elastics/ bands one behind and one below on the back side of head. Nostril holes also provided at nose for easy breathing. The mask is Unisex. Can also be used for Halloween, fun and wall art. 3D printing settings: Nozzle : 0.4mm, Print time: 18hours 24 minutes ( Face : 8hours 39 minutes, Cap : 9hours 45 minutes) Adult size filament used: 1) Face: 96 grams , 2) Cap: 161grams Layer height: Face 0.24mm, Cap: 0.3mm, Line width: 0.5mm Slicer software: Creality slicer, Printer: FDM / RESIN, Filaments: PLA, PETG, ABS, for best results use any flexible filament/resin Infill: 0 to 5 % Retraction: 4mm retraction speed 25 Nozzle Temp: 210 bed 90 for PLA (no glue stick/adhesive needed) Supports: 1)Face: place custom supports for eyebrows, rest of it doesn't need supports. 2) Cap: Place supports where it prints in air, mostly supports not necessary. Support Z offset: 0.2, XY offset: 0.5 to 1, support interface: lines 2mm thickness, Build plate adhesion: brim at least 15mm, Thank you, Happy Christmas to you and your family. Regards, Sigma Designers.

Fișier de printat：

Adult_santa_mask_top.gcode