This design from [%5159806640]and for the most part it turned out ok on my Sermoon V1 Pro but I did have some problems.1. On the tail, I had to file down the square connector to fit into the lower body.2. The wings did not fit and although I tried to glue them on with Gorilla Glue, it didn't stick for very long.3. I tried several times to print the wings without them breaking when removing the supports. I found editing the wings to be more flat worked best but still has a few minor breaks.Now I may just need to tinker some more with the settings for better print jobs. One thing for sure, if I ever get a bigger printer, I would love to try this again as one piece.As you can see in the photos, I used black for the base and blue PLA for the dragon. I wanted to do glow in the dark for the flame but that piece also includes the head. I lost count how many hours in total this one took but each piece took over 8hrs each,