A fireplace with animated flames. Simply turn the handle, and the flames will dance up and down, driven by an internal cam mechanism.

The model can be assembled with or without heat set inserts. Using heat set inserts is recommended for the main axle.

The fireplace cover requires supports, all other parts should be printable without supports (depending on the printer).

Assembly

A PDF file containing assembly instructions can be found alongside the model files.

Materials list:

• 9x heat set inserts (optional)

• 9x M3x10mm screws

• superglue

What to print:

• fireplace (threaded).stl (1x) OR fireplace (heat set inserts).stl (1x)

• coal (threaded).stl (1x) OR coal (heat set inserts).stl (1x)

• main axle (threaded).stl (1x) OR main axle (heat set inserts).stl (1x)

• flame – part 2 (threaded).stl (3x) OR flame – part 2 (heat set inserts).stl (3x)

• arm - middle.stl (1x)

• arm – side.stl (2x)

• arm extender – left.stl (1x)

• arm extender – right.stl (1x)

• base.stl (1x)

• cam.stl (3x)

• flame – part 1.stl (3x)

• handle.stl (1x)

• mantle.stl (1x)

• spacer.stl (1x)

• fireplace cover.stl (1x)

Note: the mechanism can be noisy.