Design Concept

This is a remix of what is - in my opinion - the best filament spool clip out there. I made the original clip a notch wider and added 'ears' to the ends. Sometimes the original clips slide on meshed spools so the ears were put in place to make it sit better.

It's only a 12min print on the K1C so please GIVE IT TRY!

Purpose

I have tried various clips, and they tend to lose their form over time. The edge-type clips sometimes jump off when placed flush next to other spools.

This is a flexible S shaped 'springy' clip which sits on the inner rim of the spool and holds the end of your filament securely and fits most types of 1kg spools.

Printing Recommendations

3 Walls

15% Infill

I recommend printing it with ABS or PETG if you intend to place it in your heated filament dryer.

Credit

All credit to @Whity over at Printables. See the link to the original at the bottom of this page..

If you find the clip useful in anyway... please leave a LIKE and share your makes.