3D MODEL DESCRIPTION

Barbie accessories Stanley cup or for a Keychain.

Teenie Stanley cup for a mod Barbie. Or a different keychain. Maybe earrings too?

The image of the 2 printed models only reflects 2 of the designed models.

The choosing of the model is up to the Barbie’s owner. I made 2 models with a 2 x 4mm hole to insert something resembling a straw.

I also made models with a straw in different sizes – keep in mind that that will not be strong.

My preference are the two models without straws which you can see in the image of the physical prints.

They are called models 1a and 4a in the stl’s.

The sizes can be seen in the images posted and in the PDF included.

3D PRINTING SETTINGS

Printing instructions:

• Slicer: Ultimaker Cura

• Layer Height: 0.16mm

• 7 Top and bottom Layers

• 3 Walls

Infill:

• 20% infill Lines.

• CONNECT INFILL WALLS. This setting is important to

improve strength.

Supports: Add supports for the handle.

• Overall speed for my older Ender: 20mm/s

• Brim: 2mm for easy removal.

If you are tempted to print this solid – keep in mind that the handle’s strength will be weakened.

The more joining points there are, the better the strength with small models.

Happy Printing!

พิมพ์ไฟล์：