The rubber band powered ancient style bow and arrows with round edges is a fun way to play with friends and family. The design is effective and harmless but don't shoot directly to eyes and keep them away from children below 5 years. Commercial license: You can print and sell these models. collection link: https://www.crealitycloud.com/model-detail/65687266183172699d70f9ea Print settings: Printer: Ender3 Max, Slicer: Creality 4.8.2, Nozzle: 0.4mm, Filament: PLA= Silk Copper, Silk Gold, Temperature: Hot end=210C, Bed= 90C (glue stick not required), Layer height: 0.24mm, Wall thickness: 1mm, Speed: Outer wall= 25, inner wall= 50, infill: 90, Flow: Outerwall= 100%, inner wall, infill= 102%, Line width: support interface, infill, outer wall=0.5mm, inner wall=0.5mm, Infill : Grid 5%, Support only for V1 bow: pattern= zigzag | density= 11%, Interface top and bottom = Lines | density= 18%, Offset: Z= 0.24mm, X,Y = 0.5mm, Retraction:3mm speed 25mm, Combing : all, Bed adhesion : brim 5mm, Thank you, Have a nice day, Regards, Sigma Designers