The Modular Rotating Paint Rack comes with 4 primary parts, which can be combined to accommodate a variety of paint bottle sizes and multiple rows of rotatable storage. Inspired by the lazy susan and standing coat racks, the paint rack can hold 6 to 10 bottles per row, depending on the diameter of the paint bottles.

The printable parts include the base, shaft, tray, holder clips, and the shaft Cap. Holder clips and Trays are designed for bottles with a 21mm diameter, 25mm diameter, and 35mm diameter. The number of support arms on the trays correspond to the space available relative to the paint bottle sizes. So, if storing 25mm bottles, print the 25mm tray, which can hold 8 bottles. Print all parts with 100% infill. The base and trays can be printed with or without supports. All parts have been test printed on FDM and resin printers.

Assembly is simple. Seat the 1st tray on top of the base. The flat side of the tray should face up. Thread the shaft through and screw it into the based. Slip clips onto the ends of the tray arms, with open round end out and up. For a new row, sit another tray on the top of the shaft and then screw the next shaft or a shaft cap onto the end to secure the tray. If you only want 2 rows, secure the last tray using the shaft cap.