Hello, 3D Printing enthusiasts,
We would like to inform you that we have recently made certain modifications to our Built-in Slicer print rules to enhance the quality of your prints. These modifications require precise correspondence between the selected printer during slicing and the actual printer used for printing. However, we have received feedback from several users indicating that the newly implemented adjustments can be inconvenient and at times troublesome when configuring G-codes. It is worth noting that the new printers, namely K1 and K1 Max, 3DPrintMill, necessitate a strict match between the selected printer during slicing and the actual printer when printing due to their high-speed printing capabilities. Therefore, we have made further adjustments to provide you with greater convenience while maintaining high-quality prints.

As we mentioned, K1 and K1 Max, 3DPrintMill, require a strict match between the selected printer during slicing and the actual printer when printing due to their high-speed printing capabilities. As a result, when you connect these printers on Creality Cloud, it will show you the sliced files only configured with these printers. For example, if you select K1 to print, it will only show you the sliced files under K1. Or if you select a sliced file under K1 to print, it will automatically show you the K1 for you to print.

Except for K1 and K1 Max, 3DPrintMill, other printers will go to the rule that matches the sliced file size and the print size of the printers. But we will recommend you print with the same printer when configuring sliced files which ensures you a better print effect. For example, if you select CR-200B Pro to print, it will recommend you print the sliced files under CR-200B Pro. But you can still choose other sliced files under other printers' configurations to print.