3X CR10 Smart & Smart Pro Camera Gantry Bracket Mount CR-10

No Camera Screw Needed

New Design - 3X Creality CR-10 Smart and Smart Pro Camera Gantry Mount Bracket Choice of 3 heights Low, Mid and High. Print > Click > Slot Could not be any simpler These brackets are a new simpler design to my original one with a choice of 3 choices of height positions for Mounting the camera.

Printed in PETG (PLA should be fine see below)

Print Settings

0.4 Nozzle

0.2 Later Height

20% Infill minimum (if using PLA consider stronger parameters)

You can also find me at Cults3D - 3DPFactory