Here is our favourite Santa Claus - mask, now we can become Santa whenever we want. Holes are provided on the ear where an elastic/ velcro can be placed, you can also use a rubber band / old face mask's elastic for it, anything works. Nostril holes also provided at nose for easy breathing. The mask is Unisex. Can also be used for Halloween, fun and wall art. Model link: https://www.crealitycloud.com/model-detail/65804b07501bc0b9d4f52df4 . YouTube short link: https://youtube.com/shorts/xvoAMxHB_q4?si=4L7dLvCOgmleTPvt . Print settings: Printer: Ender3 Max, Slicer: Creality 4.8.2, Nozzle: 0.4mm, Filament: PLA, Temperature: Hot end=210C, Bed= 90C (glue stick not required), Layer height: 0.3mm, Wall thickness: 1mm, Speed: Outer wall= 25, inner wall= 50, infill: 90, Flow: Outerwall= 100%, inner wall, infill= 102%, Line width: support interface, infill, outer wall=0.5mm, inner wall=0.5mm, Infill : Lines =Grid 5%, Support: pattern= zigzag | density= 11%, Interface top and bottom = Lines | density= 18%, Offset: Z= 0.24mm, X,Y = 0.5mm, Retraction:3mm speed 25mm, Combing : all, Bed adhesion : brim 15mm, Thank you, Have a nice day, Regards, Sigma Designers