Creality Cloud - All-in-One 3D Printing Platform
Messages
English
Creality Cloud App
Upload
Workbench
Premium
Sign Up

Ender 3 blue screen fix - 5 troubleshooting

Spencer Hill 3d model
Spencer Hill 18:23 11-17
Favorite
Question

Built printer, then it turned on. Leveled the plate to the print Nozzle with a piece of paper. I printed 2 test models then a 5 hour model. All 3 models we fine. Then turned off printer. The next day I turned the printer on and only got a Blue screen on my Ender 3. 

- From Frank Lovash on ifixit

ender 3 blue screen

Are you one of the people who have been getting stuck on Ender 3 blue screen? This situation can be very annoying and frustrating at the same time. Have you tried to call Creality Support, and they couldn't help you?

It's time to tell you how to get rid of Ender 3 display problems once and for all! In this article we will show you 6 ways to fix Ender 3 pro, Ender 3, Ender 3 v2 blue screen.

Let's get start! 

Why your Ender 3 got bluen screen of death?

Various reasons might cause the blue screen on Ender 3 display screen. The most usual ones are listed below for you to be aware of before attempting the fixes.

  • The hardware problem: the screen is broken.
  • The software problem: have accidentally removed the firmware for example.

If your Ender 3 got bluen screen, you must keep calm and carry on. Because we will help you to fix it!

Ender 3 blue screen fix - 6 troubleshooting

Way 1. Restart the Printer

The quick way to get your Ender 3 form blue screen is restart it. Because it is simply a technique to switch the printer fast off and then back on, this is one of the simplest but also one of the most effective solutions to the problem of Ender 3 blue screen and other display problems.

To restart your Ender 3, just turn off and unplug the power. A few minutes later, plug in the power and turn it on. If the blue screen still showing, keep going to the other ways.

restart ender 3

Way 2. Check if the screen is broken

The second way is check if the screen is broken. You need remove the screen screws, and check if the screen is obviously broken.

If the hardware is broken, it's hard to repair it. May need replace the screen with a new one.

Way 3. Make Sure Your Connections Are Secure & Fuse is Not Blown

If the connection are unscure, may ocurre the ender 3 blue screen. So now let's check out with the cable connections.

  • Re-plug the cable. Install the screen and tighten the screws.
  • Remove the mainboard fan cover, check if the screen cable is loose.
  • Use pliers to cut off the hot melt glue, re-plug the cable, install the mainboard fan cover.

Way 4. Reflash the Firmware

If you’ve tried many fixes to no avail, then reflashing your firmware could be the solution that works. Because many users experienced a blue or blank screen due to the firmware. Following below steps to reflash your firmware.

Step 1. Download the Ender 3 series firmwares form Creality Cloud. You can choose the firmware version acoording to your printer type.

choose the firmware for ender 3

Step 2. Move this firmware file onto the root level of an SD card.

Step 3. Power off your Ender 3.

Step 4. Insert the holy SD card that you just created.

Step 5. Power up your Ender 3.The screen will remain blank for a few seconds but then will boot up as normal.

Way 5. Contact Your Seller & Ask for Replacements

If nothing work, the ultimate way is contact Creality Service. If your printer is on the Warranty Period, any defects in material, the workmanship of your product will be covered until you provide any relating documents and information. More details in Creality after sale service.

Comment
Related Articles

Make a different pen holder 3D print FREE

How to create a simple 3D pen holder for organizing your desk? Find the most popular 3D pen holder models and a free pen holder 3D maker tool.

How to make a lithophane 3D print: Best lithophane maker tool

Lithophane 3D print is embossed in texture. At first glance, the printout results don't reveal much; nevertheless, when illuminated from behind, incredible detail emerges.

How to convert STL to G-code free (online & offline)

What format files are required for 3D printing? It must be STL. But, the 3D printer understands only G-code files. So, this guide will show you how to convert STL file to G-code.