Pumpkins everywhere!

Enjoy this Pumpkin Box with a twist-lock lid to store your candy… or your favorite articulated prints 😁

Many files available:

- 2 Multicolor versions, with “standard” or “thin” mouth and eyes. Use the thin for translucent filaments if you want to light it!

- 2 Different lids, with or without handle. The handle needs some force to be assembled, I recommend pressing it against the table.

⚠️ Please note the lid orientation before assembling the handle if you want it to face forward as in the picture. It's not symmetric.

- “By parts” version, for single color printers or to leave it as a carved pumpkin.

~ The Pumpkin needs supports on the upper teeth. I suggest painting these supports using the fill tool and setting the tree supports with the “strong” style. The 3MF file includes these supports and the variable layer height. Check the remaining printing settings at your convenience.

~ The Mouth needs a brim (at least 5 mm recommended). It should be assembled from the inside.

~ The eyes fit from the outside, just press them into the holes. There are 2 Eyes versions, one at its original size and one shrank slightly. The original ones worked perfectly with my A1 Mini, but depending on your printer tolerances you may need the other ones. Alternatively, you can adjust the XY compensation in the slicer to achieve the perfect fit for your print.

- A “faceless” version, in case you want to paint your own scary face 🎃

Check the Full Pumpkin in this video!: https://youtu.be/4zvEJLKPgI4

Disclaimer: Articulated animals are not included.

Check here for Commercial License: https://www.mcgybeer.xyz/commercial-license

Pumpkin Box

McGybeer

Druckeinstellungen(0)

Beschreibung

Standardlizenz

Tags

Verwandte Modelle