The Cold Snap Wedge is a 3D-printable card stopper and row divider made for multi-row cardboard storage boxes, like standard BCW and Monster boxes.

It clips directly over the cardboard partition wall to keep partial rows upright so your cards do not slide or slump. The hook includes a built-in compliant spring finger that automatically adjusts to grip both thin 2mm outer box walls and standard 5mm interior dividers.

FEATURES

• Auto-Adjusting Grip: The spring finger holds firmly on 2mm outer walls and flexes out of the way for 5mm internal dividers.
• Three Configurations: Left, Right, and Dual hook variants to fit any row in the box.
• Sized for Standard Boxes: 75mm wide and 110mm tall to easily clear raw cards, sleeves, and toploaders while letting the box lid close cleanly.
• Open-Source: Full parametric OpenSCAD project files and source models available on GitHub under Cold Front Forge.

3MF PRINT PROFILES

The included .3mf file is organized into three separate plates:

• Plate 1: Dual Hook (clips over both adjacent walls for center rows)
• Plate 2: Right Hook (clips over the right partition wall)
• Plate 3: Left Hook (clips over the left partition wall)

PRINT SETTINGS

• Orientation: Flat on front face (no supports needed)
• Material: PLA, PLA+, or PETG
• Layer Height: 0.20mm
• Wall Loops: 4 to 5 walls (important so the spring finger prints solid and keeps its flex over time)
• Infill: 15% to 20% (Gyroid works great)
• Brim: None

Cold Snap Wedge

Cold Front Forge

Druckeinstellungen(1)

0.20mm Functional Solid Hook Profile

Beschreibung

Lizenz

Tags

Verwandte Modelle