PAW PATROL MISSILES

These are different versions of Paw patrol missiles created for toy sets. I designed this from the

original version. Included are 4 different missile types where each missile has a different head

design.

3D printing settings:

▪ Slicer: Ultimaker Cura

▪ 3D printer: Creality Ender 3-V2 (with Sprite Extruder Pro)

▪ Material: PLA or PETG (I used AzureFilm Blue and Yellow PLA and Red and Black

PETG)

▪ Nozzle temperature: 200 °C (230 °C for PETG)

▪ Bed temperature: 60 °C (75 °C for PETG)

▪ Resolution: 0.12 mm

▪ Walls: 1.2 mm

▪ Top/Bottom thickness: 0.8 mm

▪ Infill: 20% (Infill pattern: Grid)

▪ Speed: 30-40 mm/s or faster (depends on your 3D printer)

▪ Cooling: 100%

▪ Adhesion: used 3.2 mm brim width for better adhesion

▪ Supports: /

▪ Amount of material: ~ 2g

▪ Printing time: ~ 45min

-------------------------------------------------------------------

Check out also my other designs at:

https://www.crealitycloud.com/user-profile/3167207896

If you want to legaly resell your 3D prints of my designs, join me on Patreon at link below:

https://www.patreon.com/VukiProduction

Please feel free to share images of your prints on this page.

Thank you, enjoy and have fun 3D printing!

Paw patrol missiles

Vuki Production