📐 Layer Height (this controls your detail)
0.12mm (sweet spot)
Premium version: 0.10mm
👉 Keeps all those tribal engravings crisp without crazy print time

🧱 Walls (important for smooth outer finish)
Walls: 3–4
Wall Line Width: 0.42
Top Layers: 5–6
Bottom Layers: 5–6
👉 More walls = cleaner surface + better feel in hand

🧠 Infill
10–15% Gyroid
👉 It’s solid enough — don’t waste filament

🌡️ Temps (PLA)
Nozzle: 205–210°C
Bed: 55–60°C
👉 If detail looks soft → lower temp slightly

⚡ Speed (this is where quality is won or lost)
Outer Wall: 40–50 mm/s
Inner Wall: 80–120 mm/s
Infill: 120–160 mm/s
Top Surface: 30–40 mm/s
👉 Slow outside = sharp detail
👉 Fast inside = saves time

🧵 Retraction (for clean details)
Distance: 0.6–0.8mm
Speed: 40–45 mm/s
👉 Helps keep those carved lines clean

🌬️ Cooling
Fan: 100% after layer 3
Minimum Layer Time: 5–8s
👉 Keeps edges sharp and prevents detail melting

🪜 Supports (GOOD NEWS: minimal needed)
Type: Tree Supports
Placement: Touching Build Plate
Density: 8–10%
Z Distance: 0.2mm
👉 Only needed under:

Chin area
Bottom lip detail
Small front overhangs

📐 ORIENTATION (VERY IMPORTANT)
✅ Print it standing upright (as shown)
👉 Why:

Keeps all front detail perfect
Cleanest look for selling
Minimal visible support marks

Idolo Guardiano Primordiale

Sirprintzalot

Druckeinstellungen(1)

0.2mm layer, 2 walls, 15% infill

Beschreibung

Standardlizenz

Tags

Verwandte Modelle