Jack Skellington Mono Lithopane Light Box – Frame + Diffuser Plate Included | Bambu Labs Lithopane Settings | Bottle Boy Designs About This Jack Skellington Mono Lithopane Light Box This is my Jack Skellington mono-style lithopane, complete with a custom frame + diffuser plate included in the STL files. All artwork was AI-generated by me and released copyright-free, so you can print, share, or sell your physical models with no restrictions. The frame is designed to fit the 9-LED Across Light Panel from AliExpress, which gives perfect brightness and even lighting. LED panel link (as requested): https://www.google.com/aclk?sa=L&ai=DChsSEwii_8O6hfaQAxWtkVAGHa-uIIUYACICCAEQHRoCZGc&co=1&ase=2&gclid=Cj0KCQiA5uDIBhDAARIsAOxj0CHbicKwHdKZdq1SIqOyrnremT3kYtxd0TqtNzbkZVG2h2lQrmILdfIaAh2UEALw_wcB&cid=CAASJeRonlBJL9so1vJzX0RtwIjjVyKg0Hgo7BYrFvrWIShAuevZ4UE&cce=2&category=acrcp_v1_32&sig=AOD64_06VqS4x3I8Gmu1KVlbev66Div_dA&ctype=5&q=&nis=4&ved=2ahUKEwjG8b66hfaQAxWSW0EAHbZoLOMQ9aACKAB6BAgIEBc&adurl= All my mono lithopane panels are interchangeable — this frame fits every mono panel I release. Recommended Bambu Labs Lithopane Slicer Settings These settings give the cleanest shadows, strongest highlights, and smoothest gradients on Bambu printers: General Settings Layer Height: 0.08–0.12 mm (0.08 mm recommended for best detail) Wall Loops: 2 Top/Bottom Layers: 0 (lithos don’t use them) Infill: 0% (set to Lightning if the slicer requires an infill type) Cooling: 100% Flow Rate: 95–100% (98% often gives the cleanest transitions) Material Filament: White PLA (matte white works best) Bed Temp: 55–60°C Nozzle Temp: 205–215°C depending on filament brand Print Orientation Always print the lithopane standing vertically Enable support for build plate only Generate brim (6–10 mm) for stability Detail Enhancers Sharp Corners: ON Arachne Perimeters: ON Ironing: OFF (not used on vertical lithos) These settings ensure deep contrast and perfect detail when lit from behind. What’s Included ✔ Jack Skellington mono lithopane panel ✔ Frame STL ✔ Diffuser Plate STL ✔ Fully compatible with the AliExpress “9-LED Across” panel ✔ No copyright restrictions ✔ Works with all my future mono lithopanes Why I Made This I’m building a full collection of universal lithopane light boxes, and I’m releasing all artwork free and copyright-free as a community gift. If you enjoy this one, more are coming! From Bottle Boy Designs Thank you for the support — it means the world. Enjoy the print, enjoy the glow, and Merry Christmas + Happy Printing! P.Si messed up the one in the images ive uploadedbut i have included slicer settings so you can get it right first time unlike me lol about a 5 hour print give or take and the frame is really sturdy even in pla