

Intro

This holder is intended for the tool kit that comes with the Ender-3 V3 SE/KE.

For those who like to edit the model: see the link at Information.

Note: The tool holder has been tested on model KE. Manually check the interference on model SE.

Properties are:

The design is very compact.
The holder does not require any mounting material and detaching of printer elements. It clicks around the right leg of the gantry.
Due to the downward protected placement, the sharp points of the cutting pliers do not pose a risk of injury. NOTE: Squeeze the cutting pliers before hanging.
The spatula can be hung by feel without threading, after which it is secured against unintentional sliding out.
Most of the sharp edges of the holder are rounded (no "Tinkercad" and "Sketchup" angularity).

Information at Thingiverse

For all latest/extra information and recent models see also https://www.thingiverse.com/thing:6449058 .

Print Settings:

Printer brand: Creality
Printer: Ender-3 V3 SE/KE
Resolution: 0.2 mm
Wall thickness: 0.8 mm
Infill: 15-20%
Filament material: PLA or even better, the more flexible PETG
Print the holder upside down. Then no support is needed when the setting of the support overhang angle is ≥45° relative to the print bed.

Mounting Instruction

See the mounting instruction video at Thingiverse (https://www.thingiverse.com/thing:6449058).

ファイルを印刷：