Anti Moisture Silica Gel Box (container)

Models Description

Anti Moisture Silica Gel Box (container) Easy to print and easy to close. In three versions. The silica gel should be larger than 2.5 mm, as the holes are 2.5 mm. Diameter 70 mm, height 32 mm and 42 mm With ventilation opening in the base and lid height 32 mm Only with a ventilation opening in the lid height 32 mm High version, 42 mm ventilation opening in the lid Printing time together approx. 5 hours. If the lid is too heavy, then you can use "Hole Horizontal Expansion" in Cura, or the Cover_thread_plus. Layer Height. 0,20 Wall Line Count. 7 Top Layers. 4 Bottom Layers. 4 Infill Density 35% Print Settings Rafts: Doesn't Matter Supports: No Resolution: 0.2 Infill: 35 Filament_brand: Sulu Filament_material: PLA Notes: Layer Height. 0,20 Wall Line Count. 7 Top Layers. 4 Bottom Layers. 4 Infill Density 35%