Coffee Bag Clip - Fast K2 Plus

🚀 Boost Panda 3D Prints settings if you enjoy this print! 🚀

⚙️ This profile is tuned specifically for the functional Coffee Bag Clip on the Creality K2 Plus, optimized for high-speed structural printing to ensure the clamping arms and threaded cap remain robust and durable for everyday kitchen use.

The 0.28mm layer height keeps the print moving quickly while maintaining precise thread engagement for the cap and secure closing pressure for the clip arms. The 0.50mm line width reinforces the outer walls and mechanical stress points so the clip handles tight bag seals without snapping.

Layer Height: 0.28 mm
First Layer Height: 0.28 mm
Default Line Width: 0.48 mm
First Layer Width: 0.55 mm
Outer Wall: 0.46 mm
Inner Wall: 0.50 mm
Top Surface: 0.46 mm
Sparse Infill: 0.50 mm
Internal Solid Infill: 0.48 mm
Seam Position: Aligned
Seam Gap: 10%
Scarf Joint Seam: None
Hole Based Wipe Speed: ON

For high-speed functional performance, use your proven K2 Plus parameters:

First Layer: 60 mm/s
First Layer Infill: 120 mm/s
Outer Wall: 300 mm/s
Inner Wall: 350 mm/s
Small Perimeters: 60%
Sparse Infill: 400 mm/s
Internal Solid Infill: 350 mm/s
Top Surface: 280 mm/s
Gap Infill: 300 mm/s
Travel: 500 mm/s
Normal Acceleration: 15,000 mm/s²
Outer Wall Acceleration: 6,000 mm/s²
Inner Wall Acceleration: 8,000 mm/s²
Travel Acceleration: 15,000 mm/s²

📌 Best for: Kitchen organization, coffee bag seals, functional household prints, utility tools 🛠️ Material: Hyper PLA / PETG / Tough PLA 🎨 Color Setup: Single-Color / Functional 🤖 Printer: Creality K2 Plus 👤 Print profile by Panda 3D Prints 🎨 Model by original artist

If these settings give you a solid Coffee Bag Clip, please Boost Panda 3D Prints and check out my other optimized profiles! 🚀

Capa para saco de café

Андрей Сп

Configurações de Impressão(2)

Coffee Bag Clip - Fast K2 Plus

0.2mm layer, 2 walls, 15% infill

Descrição

Licença

Modelos relacionados