I have made another clock here. Maybe some of you also like this clock.

I could imagine that this watch would also be a very great gift for someone.

I created a version with 200 mm for wall and table

Design Concept:

My goal is to offer a model that is both functional and simple, and that appeals to as many people as possible. I hope I have achieved this with this model.

Printing experience:

I have created a print profile for this model. If you can use it with your printer, then you just need to make sure you assign the colors correctly. Alternatively, you can replace the automatic color changes with a pause in the slicer and print the model with a printer that does not have a multicolor function.

Assembly:

The assembly is self-explanatory, as each part only fits where it belongs. Please note that you may be offered a link where you can find additional optional accessories for printing.

If you would like to get others excited about these wall clocks, please share the link on social media.

Here you will only find the dials!

You can find the necessary accessories under the following link:

https://www.crealitycloud.com/model-detail/wall-desk-clock-square-round-200mm

To minimize print time without compromising quality, I configured height range modifiers in my print profiles. So don't be surprised if the swap instructions don't match the data in the print profile

Print at 100% infill with a layer height of 0.06mm with a base layer of 0.12mm

Swap Instructions:

Start with Black

At layer #19 (1.2mm) swap to Jade White

At layer #30 (1.86mm) swap to Black

At layer #31 (1.92mm) swap to Cyan

At layer #39 (2.4mm) swap to Jade White for the rest.

If you get the message with the floating regions when slicing... you can ignore this

Just 3D Print Models & Free STL Files