Hi ! My print, of "MARIO BROS GHOST" by "Aslan3D". Slicer: Creality Print v4.3.8.6678 (Win). Printer profile "Ender-3 V3 KE_0.4 nozzel". Material profile "CR-PLA_1.75" modified (Temperature, Printing Temperature: 215.00 °C, Initial Printing Temperature: 215.00 °C, Final Printing Temperature: 215.00 °C, Auto Temperature: No.). Parameter config "Normal" (0.20mm). Scale: 100% File(s): logo 1.stl, nariz y bigote.stl (autobrim) gcode file: mbg-blanc-logo 1-nariz y bigote-Ender-3 V3 KE_0.4_CR-PLA 215_25m.gcode Filament: PLA+ Blanc ArianePlast (~ 3,459m) ~ 00 h 27 m 24 s File(s): cuerpo.stl (brim) gcode file: mbg-blanc-cuerpo-Ender-3 V3 KE_0.4_CR-PLA 215_2h26m.gcode Filament: PLA+ Blanc ArianePlast (~ 30,519m) ~ 02 h 26 m 13 s File(s): ojos.stl gcode file: mbg-noir-ojos-Ender-3 V3 KE_0.4_CR-PLA 215_3m.gcode Filament: PLA Recyclé ArianePlast (~ 0,219m) ~ 00 h 03 m 56 s File(s): sombrero.stl, logo 2.stl gcode file: mbg-rouge-sombrero-logo 2-Ender-3 V3 KE_0.4_CR-PLA 215_37m.gcode Filament: PLA Red Velleman (~ 6,392m) ~ 00 h 39 m 03 s File(s): lengua.stl (I did not put any printing support because the unsupported part will not be visible. And the nesting, despite the poorly supported part, is good once we have removed what's protrudes too much.) gcode file: mbg-rouge-lengua-Ender-3 V3 KE_0.4_CR-PLA 215_1h3m.gcode Filament: PLA Magenta Velleman (~ 9,853m) ~ 01 h 04 m 57 s After deburring, assembly and gluing. It remains to give it a quick blast with a heat gun to remove the last angel hairs. Posted as an entry to the "Christmas 3D Printing Event!" https://www.crealitycloud.com/post-detail/65839ead3e2577f851884efd https://www.crealitycloud.com/contest/christmas-3d-printing-event Print made as part of a test of the Creality "Ender-3 V3 KE" for https://www.lesimprimantes3d.fr/ https://www.lesimprimantes3d.fr/forum/topic/56116-creality-ender-3-v3-ke-la-d%C3%A9couverte-avant-le-test/ Good continuation to all.